RailQor DC-DC转换器
    SynQor坚固耐用的DC-DC转换器——铁路交通运输电源
RailQor Series Isolated DC-DC Converters RailQor系列DC-DC转换器是为了交通运输行业提供隔离直流电源的应用所设计,应用于LED显示屏、音频放大器、安全检测仪、照明和通信系统等电子设备,符合欧洲EN50155标准。这些转换器采用了SynQor的同步整流技术,获得了极高效率的行业领先性能。由于交通行业电源严峻的环境,SynQor设计了RailQor产品系列,在这些要求严苛的应用中实现更优化的性能。
产品链接
Product Part Numbering Convention
Product Part Numbering Convention
Quarter-Brick
 
RailQor Encased Mechanical Drawing
 
Click on the images to enlarge them
(will open a new window)

 NOTES
   1) M3 screws used to bolt unit's baseplate to other surfaces (such as a heatsink) must not exceed 0.100" (2.54mm) depth below the surface of the baseplate.
   2) Applied torque per screw should not exceed 6in-lb. (0.7 Nm).
   3) Baseplate flatness tolerance is 0.004" (.10mm) TIR for surface.
   4) Pins 1-3, 5-7 are 0.040" (1.02mm) diameter with 0.080" (2.03 mm) diameter standoff shoulders.
   5) Pins 4 and 8 are 0.062" (1.57 mm) diameter with 0.100" (2.54 mm) diameter standoff shoulders.
   6) All Pins: Material - Copper Alloy - Finish (RoHS 6/6)- Matte Tin over Nickel plate
   7) Weight: 3.02 oz (85.7 g)
   8) All dimensions in inches (mm)
        Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm)
                            x.xxx +/-0.010 in. (x.xx +/-0.25mm)
   9) Workmanship: Meets or exceeds IPC-A-610C Class II
 10) Recommended pin length is 0.03" (0.76mm) greater than the PCB thickness.

 PIN-OUT         See RailQor Converters Pin-Out description
Encased Flanged Quarter-Brick
 
RailQor Encased Flanged Mechanical Drawing
 
Click on the images to enlarge them
(will open a new window)

 NOTES
   1) Applied torque per screw should not exceed 6in-lb.(3in-lb recommended).
   2) Baseplate flatness tolerance is 0.01" (0.2 mm) TIR for surface
   3) Pins 1-3, 5-7 are 0.040" (1.02mm) diameter with 0.080" (2.03 mm) diameter standoff shoulders
   4) Pins 4 and 8 are 0.062" (1.57mm) diameter with 0.100" (2.54mm) diameter standoff shoulders.
   5) All Pins: Material - Copper Alloy, Finish (RoHS 6/6) - Matte Tin over Nickel plate
   6) Total Weight: 3.12 oz. (88.5 g)
   7) All dimensions in inches (mm)
        Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm)
                            x.xxx +/-0.010 in. (x.xx +/-0.25mm)
   8) Workmanship: Meets or exceeds IPC-A-610C Class II
   9) Recommended pin length is 0.03" (0.76mm) greater than the PCB thickness.
 10) A thermal interface material is required to assure proper heat transfer from the flanged baseplate to the cooling surface. Thermal grease may be used, or materials such as         Thermalloy's Grafoil or Bergquist HiFlow and Softflow. Other similar products are available from many heatsink manufacturers.

 PIN-OUT         See RailQor Converters Pin-Out description