EMI Filter Modules |
||
EMI Filters for InQor, Mil-COTS and Hi-Rel dc/dc converters |
InQor Filters
| EMI FILTER MODULES | |||||||
| Model Number | Input Voltage | Output Current |
Isolation Voltage (to case) |
Maximum
DC Resistance @ 100°C |
Differential Mode Attenuation | Common Mode Attenuation | |
| Continuous |
Surge³ (<100ms) |
||||||
| IQ040PFQTx30 | ±40V | ±50V | 30A | 2250V | 20mΩ | >80dB @ 250kHz | >36dB @ 250kHz |
| IQ080PFQTx20 | ±80V | ±100V | 20A | 2250V | 32mΩ | >80dB @ 250kHz | >36dB @ 250kHz |
| IQ200PFQTx10 | ±200V | ±250V | 10A | 2250V | 70mΩ | >80dB @ 500kHz | >50dB @ 500kHz |
| IQ500PFQTx04 | ±500V | ±630V | 4.0A | 2500V | 180mΩ | >80dB @ 500kHz | >50dB @ 500kHz |
MilQor Filters
| Mil-COTS EMI FILTER MODULES | |||||||
| Model Number | Input Voltage | Output Current |
Isolation Voltage (to case) |
Maximum DC Resistance @ 100°C |
Differential Mode Attenuation | Common Mode Attenuation | |
| Continuous |
Surge³ (<100ms) |
||||||
| MCOTS-F-28-T-HT | ±40V | +210V,-50V | 30A | 2250V | 50mΩ | >80dB @ 250kHz | >36dB @ 250kHz |
| MCOTS-F-28-P-QT | ±40V | ±50V | 30A | 2250V | 20mΩ | >80dB @ 250kHz | >36dB @ 250kHz |
| MCOTS-F-48-P-QT | ±80V | ± 100V | 20A | 2250V | 32mΩ | >80dB @ 250kHz | >36dB @ 250kHz |
| MCOTS-F-270-P-QT | ±500V | ±630V | 4.0A | 2500V | 180mΩ | >80dB @ 500kHz | >50dB @ 500kHz |
|
HI-REL EMI FILTERS |
||||||||
| Model Number | Input Voltage | Output Current |
Isolation Voltage (to case) |
Maximum DC Resistance @ 125°C |
Differential Mode Attenuation (@ 500kHz) |
Common Mode Attenuation
(@500kHz) |
||
| Continuous |
Surge³ (<100ms) |
|||||||
| ±40V | ±50V | 20A | 500V | 35mΩ | >80dB | >60dB | ||
| ±40V | +110V,-50V | 20A | 500V | 60mΩ | >80dB | >60dB | ||
| ±70V | ±100V | 20A | 500V | 35mΩ | >80dB | >60dB | ||
| ±70V | +110V,-70V | 20A | 500V | 60mΩ | >80dB | >60dB | ||
| ±70V | +210V,-70V | 20A | 500V | 60mΩ | >80dB | >60dB | ||
| ±400V | ±500V | 2.0A | 500V | 1.6Ω | >80dB | >60dB | ||
|
MQME-270-R² |
±400V | ±500V | 2.0A | 500V | 1.6Ω | >80dB | >60dB | |
|
|
||||||||
| ±40V | ±50V | 10A | 500V | 60mΩ | >80dB | >60dB | ||
| ±70V | ±100V | 10A | 500V | 60mΩ | >80dB | >60dB | ||
| ±400V | ±500V | 1.0A | 500V | 500mΩ | >50dB | >60dB | ||
| Note 1 | T and T6 filters feature enable pass-through, transient suppression, soft-start and reverse polarity protection circuitry in addition to passive filter components. |
| Note 2 | R filters feature reverse polarity protection circuitry in addition to passive filter components. |
| Note 3 | While the passive filters can withstand these long-duration surge voltages, the surge voltage will be passed to the filter’s load. Care should therefore be taken to make sure that the load will also be able to withstand any applied surges. The transient suppression filters block surges of either polarity, as specified in their data sheets |




