NiQor High Voltage DC-DC Converters
    High input voltage, non-isolated brick DC-DC converters
NiQor Series Hi-Voltage Non-Isolated DC-DC Converters The high input voltage NiQor® family of DC-DC converters offer a unique solution for converting high-powered, varible voltages to a wide range of output voltages. The converter is a non-isolated buck-boost regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. Suitable for use in IBA or to provide a regulated output voltage from a battery source or other variable voltage source. Can be configured to Buck the input voltage down or Boost the input voltage up using a single external resistor
Product Links
Back to Product Matrix and Hightlights
Product Part Numbering Convention
Package Dimension Drawings
 
Quarter-Brick
Pin Name Function
1 Vin(+) Positive input
2 ON/OFF TTL input to turn converter on and off, referenced to Vin(-), with internal pull up
3 Vin(-) Negative input voltage, internal short to Pin 4
4 Vout(-) Negative output voltage, internal short to Pin 3
5 SENSE(-) Negative remote sense. See note 1 (S option) Isense (C option)
6 TRIM Output voltage trim
7 SENSE (+) Positive remote sense. See note 2 (S option) Isense (C option)
8 Vout(+) Positive output voltage
Notes: 1. SENSE(-) should be connected to Vout(?) either remotely or at the converter.
             2. SENSE(+) should be connected to Vout(+) either remotely or at the converter.
 
Eighth-Brick
Pin Name Function
1 Vin(+) Positive input voltage
2 ON/OFF TTL input to turn converter on and off, referenced to Vin(-), with internal pull up
3 Vin(-) Negative input voltage, internal short to Pin 4
4 Vout(-) Negative output voltage, internal short to Pin 3
5 SENSE(-) Negative remote sense1 (S option) ITRIM Current limit trim (C option)
6 VTRIM Output voltage trim
7 SENSE(+) Positive remote sense2 (S option) IMON Current monitor output (C option)
8 Vout(+) Positive output voltage
Notes: 1. SENSE(-) should be connected to Vout(?) either remotely or at the converter.
             2. SENSE(+) should be connected to Vout(+) either remotely or at the converter.
 
Half-Brick
Pin Name Function
1 Vin(+) Positive input voltage
2 ON/OFF TTL input to turn converter on and off, referenced to Vin(-), with internal pull up
ITRIM Output current trim
ISHARE Current share
3 Vin(-) Negative input voltage, internal short to Pin 4
4 Vout(-) Negative output voltage, internal short to Pin 3
5 SENSE(-) Negative remote sense
6 VTRIM Output voltage trim
7 SENSE(+) Positive remote sense
8 Vout(+) Positive output voltage