NQ60x60EGx05 DC-DC Converter

9-60V

0 - 60V

5.0A

Non-Isolated

Eighth-brick

Continuous Input

Outputs

Current

Isolation

DC-DC Converter

Product Details

The NiQor Eighth-brick dc-dc converter is a non‑isolated buckboost regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. The High Input Voltage NiQor Brick family of converters can be used in traditional DPA (distributed power architecture) systems or provide a regulated output voltage from a battery source or other variable voltage source. The NiQor Eighth-brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor. These modules are RoHS 6/6 compliant (see page 12).

Operational Features

• Ultra high efficiency, up to 96% at full rated load current
• Delivers up to 5.0A of output current
• Input Voltage Range: 9 - 60V
• Output voltage range: 0 - 60V (negative output is possible)
• Extensive on-board input and output filtering
• No minimum load requirement means no preload resistors required
• Buck or buck-boost versions available
• Adjustable current limit with current monitor (C option)

Mechanical Features

• Industry standard eighth-brick pin-out configuration
• Sizes: .99" x 2.39" (25.04x60.6 mm)
Flanged - 1.45” x 2.39” (36.8 x 60.6mm)
• Total height only 0.500" (12.7 mm)
• Total weight: 1.7oz (48g)
Flanged: 1.9oz (53g)

Control Features

• On/Off control
• Output voltage trim permits custom voltages
• Remote Sense (S option, standard)
• Current limit trim (C option)
• Output voltage trim range from 0 - 60V

Safety Features

● UL 60950-1:2007
● EN60950-1/A12:2011
● CAN/CSA-C22.2 No. 60950-1:2007

Protection Features

• Input under-voltage lockout protects the converter at low input voltage conditions
• Over-current shutdown protects converter from excessive load current or short circuits
• Input/output over-voltage protection protects load and regulator from damaging voltages
• Thermal shutdown protects converter from abnormal environmental conditions