DC-DC Converter


0 - 60V




Continuous Input



DC-DC Converter

Product Details

The MCOTS NiQor® eighth-brick DC-DC converter is a non-isolated buck-boost regulator which employs synchronous rectification to achieve extremely high conversion efficiency. The High Input Voltage MCOTS NiQor Brick family of converters can be used in traditional DPA (distributed power architecture) systems or provide a regulated output voltage from a battery source or other variable voltage source. The MCOTS NiQor Brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor. The module is RoHS 6/6 compliant (see last page).

Operational Features

• High efficiency, 96% at full rated load current
• Delivers up to 15A of output current
• Input Voltage Range: 9-60Vdc
• Output Voltage Range: 0 - 60V (negative output is possible)
• Extensive on-board input and output filtering
• No minimum load requirement means no preload resistors required
• Adjustable current limit with current monitor

Mechanical Features

• Industry standard eighth-brick pin-out configuration
• Standard size: .99" x 2.39" (25 x 60.6 mm)
• Total height only 0.500" (12.7 mm), permits better airflow and smaller card pitch

Control Features

• On/Off control
• Output voltage trim permits custom voltages
• Settable current limit
• Output voltage trim range of 0V - 60V

Protection Features

• Input under-voltage lockout protects the converter at low input voltage conditions
• Over-current shutdown protects converter from excessive load current or short circuits
• Input/output over-voltage protection protects load and regulator from damaging voltages
• Thermal shutdown protects converter from abnormal environmental conditions