MCOTS-N-28VE-90-QT DC-DC Converter

9-90V

0 - 90V

18 A

Non-Isolated

Quarter-brick

Continuous Input

Output

Current

DC-DC Converter

Product Details

The MCOTS NiQor® Quarter-brick DC-DC converter is a non-isolated buck-boost regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. The High Input Voltage MCOTS NiQor Brick family of converters can be used in traditional DPA (distributed power architecture) systems or provide a regulated output voltage from a battery source or other variable voltage source. The MCOTS NiQor Brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor.

Operational Features

• High efficiency, 96% at full rated load current
• Delivers up to 18 A of output current
• Input Voltage Range: 9-90 Vdc
• Output Voltage Range: 0-90 V (negative output is possible)
• Extensive on-board input and output filtering
• No minimum load requirement means no preload resistors required
• Adjustable current limit with current monitor

Mechanical Features

• Industry standard pin-out configuration
• Standard size: 1.54" x 2.39" x 0.515" 39.01 x 60.6 x 13.08 mm
• Total weight: Encased - 3.5 oz. (100 g)

Control Features

• On/Off control
• Output voltage trim permits custom voltages
• Settable current limit
• Output voltage trim range of 0V - 90V

Protection Features

• Input under-voltage lockout protects the converter at low input voltage conditions
• Over-current shutdown protects converter from excessive load current or short circuits
• Input/output over-voltage protection protects load and regulator from damaging voltages
• Thermal shutdown protects converter from abnormal environmental conditions

MCOTS-N-28VE-90-QT

Documents

Accessories