PFCU390HPx07 AC-DC PFC

85-264Vrms*

47 - 63Hz / 360 - 800Hz

390Vdc

700W

≥0.99

Up to 96%

Input Voltage

Input Frequency

Output Voltage

Output Power

Power Factor

Full Load Efficiency

Product Details

The PFCQor® Power Factor Correction module is an essential building block of an AC-DC power supply. Used in conjunction with a hold-up capacitor, SynQor’s high efficiency DC-DC converters and SynQor’s AC line filter, the PFCQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input. The PFCQor is capable of being paralleled for higher power levels. The module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation environments.

* The label shows a narrower input voltage range to be consistent with labeling requirements of IEC60950-1, Section 1.7

Operational Features

• Universal input voltage range: 85-264Vrms
• Universal input frequency range: 47 - 63Hz / 360 - 800Hz
• Up to 700W output power
• ≥0.99 Power Factor
• High efficiency:
- >96% (230Vrms)
- >94% (115Vrms)
• Internal inrush current limit
• Auxiliary 10V bias supply
• Can be paralleled with current sharing
• Compatible with SynQor DC-DC converters & AC line filters

Mechanical Features

• Industry standard half-brick pin-out
• Size: 2.386” x 2.486” x 0.512” (60.6 x 63.1 x 13.0 mm)
• Total weight: 4.9 oz (139 g)
• Flanged baseplate version available

Compliance Features

(With SynQor AC Line Filter)
• EN55011 and EN55022, FCC Part 15
• EN61000-3-2

Control Features

• PFC Enable
• Load Enable (also: Power Out Good signal)
• AC Power Good Signal
• Clock synchronization
• Output current monitor / Active current sharing

Protection Features

• Input current limit and auto-recovery short circuit protection
• Auto-recovery input under/over-voltage protection
• Auto-recovery output over-voltage protection
• Auto-recovery thermal shutdown

PFCU390HPx07

Documents

Accessories