Operational Features
• High efficiency, >87% at full rated load current
• Delivers up to 6.7 amps of output current (100W) with minimal derating - no heatsink required
• Wide input voltage range: 18V – 36V meets or exceeds all 24V bus standards
• Fixed frequency switching provides predictable EMI performance
• No minimum load requirement means no preload resistors require
Mechanical Features
• Industry standard quarter-brick pin-out configuration
• Industry standard size: 1.45” x 2.3”
• Total height less than 0.40”, permits better airflow and smaller card pitch
• Total weight: 34 grams (1.2 oz.), lower mass greatly reduces vibration and shock problems
Control Features
• On/Off control referenced to input side (positive and negative logic options are available)
• Remote sense for the output voltage compensates for output distribution drops
• Output voltage trim permits custom voltages and voltage margining
Safety Features
• 2000V, 10 MΩ input-to-output isolation provides input/output ground separation
• UL 1950 recognized (US & Canada), basic insulation rating (pending)
• TUV certification to EN60950 (pending)
• Meets 72/23/EEC and 93/68/EEC directives which facilitates CE Marking in user’s end product
• Board and plastic components meet 94V-0 flammability requirements
• NEBS and ETSI compliant
Protection Features
• Input under-voltage lockout disables converter at low input voltage conditions
• Output current limit and short circuit protection protects converter from excessive load current or short circuits
• Output over-voltage protection protects load from damaging voltages
• Thermal shutdown protects converter from abnormal environmental conditions• Input under-voltage lockout disables converter at low input voltage conditions
• Output current limit and short circuit protection protects converter from excessive load current or short circuits
• Output over-voltage protection protects load from damaging voltages
• Thermal shutdown protects converter from abnormal environmental conditions