PQ24280QEx11 DC-DC Converter

18-36 V

50V

28V

300W

2250V dc

Quarter-brick

Input

Transient Input

Output

Max Power

Isolation

DC-DC Converter

Product Details

The PQ24280QEx11 PowerQor® Exa Quarter-brick converter is a next-generation, board-mountable, isolated, fixed switching frequency DC-DC converter. The Exa series offers industry leading power density for standard isolated DC-DC converters with both a wide input range and a tightly regulated output. This module supplies an isolated step down voltage from 18-36 V to 28 V and provides more available power and higher efficiency than competitive converters. RoHS Compliant (see last page).

Operational Features

• High efficiency, 94% at full rated load current
• Delivers 10.7A full power with minimal derating - no heatsink required
• Operating input voltage range: 18-36 V
• Input voltage transient capability: 50V, 1,000ms
• Fixed frequency switching provides predictable EMI
• No minimum load requirement
• Wide output voltage Trim range (-50% to +10%), see trim section

Mechanical Features

• Industry standard quarter-brick pin-out
• Open frame Size: 1.45" x 2.30" x 0.445" (36.8 x 58.4 x 11.3mm)
• Open frame weight: 1.5 oz (43 g)
• Flanged pins designed to permit surface mount soldering, avoid wave solder using FPiP technique on open frame units

Control Features

• On/Off control referenced to input side
• Positive and negative logic options are available

Safety Features

• CAN/CSA C22.2 No. 60950-1
• UL 60950-1
• EN 60950-1

Protection Features

• Input under-voltage lockout disables converter at low Vin conditions
• Output current limit
• Short circuit protection
• Protection from permanent damage and hazardous conditions
• Active back bias limit
• Smooth startup with external load induced pre-bias
• Auto-recovery output OVP protects load from damaging voltages
• Thermal shutdown protects converter from abnormal conditions