PQ40080QGx09 DC-DC Converter

18-75V

8V

9A

72W

2000V dc

Quarter-brick

Continuous Input

Outputs

Current

Max Power

Isolation

DC-DC Converter

Product Details

The PQ4008QGx09 PowerQor® Giga quarter-brick converter is a next-generation, board-mountable, isolated, fixed switching frequency DC/DC converter that uses synchronous rectification to achieve extremely high conversion efficiency. The power dissipated by the converter is so low that a heatsink is not required, which saves cost, weight, height, and application effort. All of the power and control components are mounted to the multi-layer PCB substrate with high-yield surface mount technology for greater reliability. The PQ40 module offeres a wide input voltage range to cover both 24V and 48V applications. RoHS compliant (see last page).

Operational Features

• High efficiency, 90% at full rated load current

Mechanical Features

• Industry standard pin-out configuration
• Standard Size: 2.30"x1.45"x0.397" (58.4x36.8x10.08mm)
• Weight: 1.2 oz. (34 grams)
• Flanged pins designed to permit surface mount soldering, avoid wave solder using FPiP technique on open frame units

Control Features

• On/Off control referenced to input side (positive and negative logic options are available)
• Remote sense for the output voltage compensates for output distribution drops
• Output voltage trim permits custom voltages and voltage margining

Safety Features

• CAN/CSA C22.2 No. 60950-1

Protection Features

• Input under-voltage lockout disables converter at low input voltage
• Output current limit and short circuit protection protects converter from excessive load current or short circuits
• Active back bias limit prevents damage to converter from external load induced pre-bias
• Output over-voltage protection protects load from damaging voltages
• Thermal shutdown protectsconverer from abnormal environmental conditions