PQ50073HZx60

DC-DC Converter

44-52V

7.3V

60A

438W

2250V dc

Half-Brick

Input

Output

Current

Max Power

Isolation

DC-DC Converter

Product Details

The PQ50073HZB60 PowerQor Zeta Half-Brick converter is a next-generation, board-mountable, isolated, fixed switching frequency DC/DC converter. The Zeta series offers industry leading power density for standard isolated DC/DC converters with both a wide input range and a tightly regulated output. Targeted for use in intermediate bus architectures, this module supplies an isolated step down voltage from 44-52V to 7.3V and provides 2,250Vdc isolation, tolerance of output current transients up to 85A, and more available power and higher efficiency than most competitive bus converters. RoHS compliant (see last page).

Operational Features

• High efficiency, 93% at full rated load current
• Delivers 438W of output power with minimal derating
• Operating input voltage range: 44-52Vdc
• Fixed frequency switching provides predictable EMI Output voltage trim range of -50%, +10%

Mechanical Features

• Industry standard half brick pin-out configuration
• Standard Size Baseplated:2.40" x 2.30" (60.6 x 63.1mm)
• Total height only 0.495” (12.6mm)
• Baseplated Weight: 4.3oz (123g) typical
• Flanged pins designed to permit surface mount soldering (avoid wave solder) using FPiP technique

Control Features

• On/Off control referenced to input side

Safety Features

• UL 60950-1:2007
• CAN/CSA-C22.2 No. 60950-1:2007
• EN60950-1:A12:2011

Protection Features

• Input under-voltage lockout
• Output current limit and short circuit protection
• Active back bias limit
• Output over-voltage protection
• Protection from permanent damage and hazardous conditions
• Thermal shutdown