Operational Features
• Ultra-high efficiency, >95% at full rated load current, >96% at half rated load current
• Delivers up to 17 A of output current (200 W) with minimal derating - no heatsink required
• Wide input voltage range: 35V – 75V, with 100V, 100ms input voltage transient capability
• Fixed frequency switching provides predictable EMI performance
• No minimum load requirement means no preload resistors required
• Wide output voltage trim range (-50% to +5%), see trim section
Mechanical Features
• Industry standard pin-out configuration
• Standard Size Open Frame:1.45" x 2.30" (36.8 x 58.4mm)
• Total Open Frame height only 0.417” (10.59mm) permits better airflow and smaller card pitch
• Open Frame Weight: 1.5 oz. (42g)
• Flanged pins designed to permit surface mount soldering, avoid wave solder using FPiP technique on open frame units
Control Features
• On/Off control referenced to input side
• Positive and negative logic options are available
Safety Features
• UL 60950-1/R2011-12
• EN60950-1/A2:2013
• CAN/CSA-C22.2 No. 60950-1/A1:2011
Protection Features
• Input under-voltage lockout disables converter at low Vin conditions
• Output current limit
• Short circuit protection
• Protection from permanent damage and hazardous conditions
• Active back bias limit
• Latching output OVP protects load from damaging voltages
• Thermal shutdown protects converter from abnormal conditions