Results below
The MCOTS-B-270-31-FT bus converter is a nextgeneration, board-mountable, isolated, fixed switching frequency DC-DC converter that uses synchronous rectification to achieve extremely high conversion efficiency. The MCOTS series provides an isolated step down voltage from 270 V to 31 V intermediate bus with no regulation in a standard full-brick module. MCOTS-B-270-31-FT converter is ideal for creating the mid-bus voltage required to drive standard 31 V DC-DC isolated converters.
The MCOTS NiQor® eighth-brick DC-DC converter is a non-isolated buck-boost regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. The High Input Voltage MCOTS NiQor Brick family of converters can be used in traditional DPA (distributed power architecture) systems or provide a regulated output voltage from a battery source or other variable voltage source. The MCOTS NiQor Brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor. The module is RoHS 6/6 compliant (see last page).
The MCOTS NiQor® half-brick DC-DC converter is a non-isolated buck-boost regulator, which employs synchronous rectification to achieve extremely high conversion efficiency. The High Input Voltage MCOTS NiQor Brick family of converters can be used in traditional DPA (distributed power architecture) systems or provide a regulated output voltage from a battery source or other variable voltage source. The MCOTS NiQor Brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor.
The Mil-COTS series of EMI filters brings SynQor’s field proven technology and manufacturing expertise to the military and aerospace industry. SynQor’s innovative packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these filters have high differential-mode and common-mode attenuation, low DC resistance, and a stabilizing bulk capacitor resistor. They follow conservative component derating guidelines and they are designed and manufactured to the highest standards.
The MilCOTS 3-Phase MPFCQor Power Factor Correction module is an essential building block of an AC-DC power supply. Used in conjunction with one of SynQor’s matched 3-Phase AC line filters and a limited amount of stabilizing capacitance, this MPFCQor will draw well-balanced and low-distortion sinusoidal currents from each phase of a 3-Phase AC input. It is designed to comply with a wide range of military standards and is manufactured in the United States.
The Mil-COTS series of EMI filters brings SynQor’s field proven technology and manufacturing expertise to the military and aerospace industry. SynQor’s innovative packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these filters have high differential-mode and common-mode attenuation, low DC resistance, and a stabilizing bulk capacitor resistor. They follow conservative component derating guidelines and they are designed and manufactured to the highest standards.
Output signal mating cable with pre-stripped wire ends (36")
AC Cap Cable with Pre-Stripped Wire Ends (36"), 12 AWG
The Mil-COTS series of EMI filters brings SynQor’s field proven technology and manufacturing expertise to the military and aerospace industry. SynQor’s innovative packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these filters have high differential-mode and common-mode attenuation, low DC resistance, and a stabilizing bulk capacitor MCOTS-F-28-P-QT resistor. They follow conservative component derating EMI FILTER -40V to +40Vin 70Aout guidelines and they are designed and manufactured to the highest standards.