Evaluation Boards
This guide provides a list of orderable evaluation boards available to facilitate testing and evaluation of SynQor modules.
Addresses the European standards EN50155 and RIA12 and how to meet them using SynQor's RailQor DC‑DC converters. Details the design of a transient and surge protection circuit aimed at meeting RIA‑12 requirements with RailQor products. Full schematic and BOM are provided.
SynQor has developed EVAL-KIT-10000[34, 37, 38]-xx evaluation kit to facilitate testing of our AeroQor Isolated 3-Phase PFC converters and our AC Line Filters. These EVAL-KITs are available with 12, 24, 28, 48, or 54 Vdc output.
This is the evaluation board documentation, which includes the schematic, component placement, and parts list. The applicable series of DC‑DC converter modules include the following rated to less than 300 W with an input rated to 100 V or less: MCOTS‑C‑28/28V/28VE, MCOTS‑C‑48, PowerQor (PQ), InQor (IQ), RailQor (RQ), BusQor (BQ), Semi‑Regulated BusQor (SQ) and CFQor (CF).
This is the evaluation board documentation, which includes the schematic, component placement, and parts list. The applicable series of DC‑DC converter modules include MCOTS‑C‑270, MCOTS‑C‑150 and the InQor (IQ), RailQor (RQ), and half brick BusQor (BQ) that are rated for voltages up to 450 Vdc, 475 V surge.
This is the evaluation board documentation, which includes the schematic, component placement, and parts list. The applicable series of DC‑DC converter modules are the DQ DualQor.
This is the evaluation board documentation, which includes the schematic, component placement, and parts list. The applicable series of DC‑DC converter modules include MCOTS‑C‑28/28V/28VE, MCOTS‑C‑48, PowerQor (PQ), InQor (IQ), RailQor (RQ), BusQor (BQ), Semi‑Regulated BusQor (SQ) and CFQor (CF) rated to 100 V or less.
This is the evaluation board documentation, which includes the schematic, component placement, and parts list. The applicable series of DC‑DC converter modules include the half brick NQ90, NQ60, and MCOTS‑N‑28V/VE.
This is the evaluation board documentation, which includes the schematic, component placement, and parts list. The applicable series of non‑isolated DC‑DC converter modules include the quarter‑brick and eighth‑brick battery‑Charging version (C‑version) of the NQ20, NQ40, and NQ60.
SynQor has developed EVAL‑1000019, an evaluation board to facilitate testing of our high current, C‑Version non‑isolated quarter and eighth brick DC‑DC converters.
This is the evaluation board documentation, which includes the schematic, component placement, and parts list. The applicable series of DC‑DC modules include the Demi brick single and dual converters and Demi brick filters.
This application note is a guide to the features, schematic, component placement, and Bill of Material for this evaluation board. The applicable converter modules are the MPFIC‑U‑XX‑HT isolated PFC and the MACF‑U‑230‑ET AC Line Filter.
This application note aids the user with operation of the 3‑phase PFC evaluation board. Basic operation of the 3‑phase PFC module is explained with guidance to properly use the evaluation board in order to observe behavior of the 3‑phase PFC module.
This application note is a guide to the Two Paralleled 3-Phase PFC Converters with 3‑Phase AC Line Filters, Evaluation Kit.
SynQor has developed EVAL-KIT-10000[33, 35, 36]-xx evaluation kit to facilitate testing of our Military Isolated 3-Phase PFC converters and our AC Line Filters. These EVAL-KITs are available with 12, 24, 28, 48, or 54 Vdc output.